Connections; Power Connection - Barco FLM HD18 User Manual

5. CONNECTIONS

About this chapter
This chapter describes more in detail the power (P), the input source (S) and the communication (C) connections of the FLM HD18.
P
Image 5-1
Overview
•

Power connection

• Input source connections
• Communication connections
5.1 Power connection
C
AUTION
How to connect your projector with the local power net ?
1. Ensure that the power switch (S) stands in the "0" (OFF) position.
2. Connect the power cord (P) with the power input socket of the projector as illustrated below.
3. Secure the power plug by locking the plug holder clamp (H).
4. Connect the other end of the power cord with the local power net.
Caution: Ensure that the power net meets the power requirements of the projector, which are: 200-240 VAC, 50–60 Hz, 20
amps at 230 VAC.
R5976986 FLM HD18 15/03/2010
:
Use only the power cord provided with the projector.
5. Connections
C S
35