Framing And Clearances; Selecting Appliance Location - Heat & Glo LifeStyle Twilight-II-B Owner's Manual

3 3

Framing and Clearances

NOTE:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see Figure 3.1).
In addition to these framing dimensions, also reference the following section:
• Clearances and Mantel Projections (Sections 3.B and 3.C)
Figure 3.1 Appliance Locations
GLASS
B
GLASS
A
D
GLASS
C
GLASS
A
Minimum Minimum
Inches 43 1/2
Millimeters 1092.2 12.7
Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. E • 11/06
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
NOTE: For actual appliance dimensions refer to Section
13.
FLUSH TO EXTERIOR INSULATED ENVELOPE
B
E
B
FLUSH TO EXTERIOR INSULATED ENVELOPE
B C D
- Minimum
24 36
609.6 914.4
WARNING
E
-
43
1092.2
7