Troubleshooting; Continuous Scan Mode - LXE MX3X User Manual

Hide thumbs Also See for MX3X:

Table of Contents

Troubleshooting

Can't change the date/time or

adjust the volume.

Touchscreen is not accepting

stylus taps or needs recal-

ibration.

MX3X seems to lockup as soon

as it is warm booted.

New MX3X main batteries don't

last more than a few hours.

If Continuous Scan Mode has been enabled (factory default setting is 'Disabled'), the laser (or imager) is always on and

decoding.

Caution: Laser beam is emitted continuously. Do not stare into the laser beam.

AppLock is installed and may be running in User Mode on the MX3X. AppLock user mode

restricts access to the control panels.

Press <Ctrl>+<Esc> to force the Start Menu to appear. Use the tab, backtab and cursor

keys to move the cursor from element to element.

There may be slight delays while the wireless client connects to the network, authorization

for voice-enabled applications complete,Wavelink Avalanche management of the MX3X

startup completes,and Bluetooth relationships establish or re-establish.

When the desktop appears or an application begins, the MX3X is ready for use.

New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries) grad-

ually lose their capacity over time (in a linear fashion) and never just stop working. This is

important to remember – the MX3X is always 'on' even when in the Suspend state and

draws battery power at all times.

E-EQ-MX3XOGWW-P-ARC [ 32 ] MX3X User Guide

Table of Contents