Troubleshooting; Related Manuals For Startup - LXE MX8 User Manual

14

Troubleshooting

Can't calibrate the touch screen,
change the date/time or adjust the
volume.
RFterm opens and runs upon each
cold reset and warm reset.
The MX8 seems to lockup as soon
as it is warm booted.

Related Manuals for Startup

Integrated Scanner Programming Guide – contains programming barcodes used when setting
up integrated scan engines.
•
•
•
MX8 Reference Guide – contains instruction, technical and troubleshooting information for
software and hardware functions.
MX8 Multi-Charger User's Guide – contains user, technical and troubleshooting information for
the MX8 battery Multi-Charger.
MX8 Cradle Reference Guide – contains user, technical and troubleshooting information for the
MX8 docking cradles.
MX8 User's Guide
AppLock is installed and running on the mobile device. AppLock
restricts User access to running programs. Changes or modifications
require Administrator access.
Refer to AppLock in the MX8 Reference Guide for setup and
processing information.
Tap File | Exit to close the RFTerm application. When installed,
RFTerm opens and runs by default after every reset.
There may be small delays while the wireless client connects to the
network, authorization for Voxware-enabled applications complete,
Wavelink Avalanche management of the MX8 startup completes, and
Bluetooth relationships establish or re-establish.
SE955 scanner barcode reading parameters, refer to Chapter 2 in the Integrated Scanner
Programming Guide.
Intermec EV-15 linear imager, refer to Chapter 3 in the Integrated Scanner Programming
Guide.
5300 2D imager, refer to Chapter 5 in the Integrated Scanner Programming Guide.
In Brief . . .
E-EQ-MX8OGWW-C