Troubleshooting; Related Manuals For Startup; Entering The Applock Activation Key; Activation Key (Hotkey) - LXE MX8 Reference Manual

Quick Start

Troubleshooting

Can't calibrate the
touchscreen, change
the date, time or
adjust the volume.
RFTerm opens and
runs upon each cold
boot and warm boot.
The MX8 seems to
lockup as soon as it is
warm booted.

Related Manuals for Startup

Integrated Scanner Programming Guide – contains programming barcodes used when setting up
integrated scan engines.
• SE955 scanner barcode reading parameters, refer to Chapter 2 in the Integrated Scanner
Programming Guide.
• Intermec EV-15 linear imager, refer to Chapter 3 in the Integrated Scanner Programming
Guide.
• 5300 2D imager, refer to Chapter 5 in the Integrated Scanner Programming Guide.
5300 2D Imager uses a configuration file to set initial parameters, not barcodes.
MX8 User's Guide – contains instruction, explanations and troubleshooting information for the
MX8 end-user.
MX8 Cradle Reference Guide – contains user instruction, technical and troubleshooting
information for the MX8 desktop cradle.
MX8 Multi-Charger User's Guide – contains user, technical and troubleshooting information for
the MX8 battery multi-charger.

Entering the AppLock Activation Key

See Also:

Activation Key (Hotkey)

If the mobile device uses LXE's AppLock to allow the user to switch between two applications,
the default Activation key is Ctrl+Spc. The key sequence switches the focus between one
application and another. Data entry affects the application running in the foreground only. Note
that the system administrator may have assigned a different key sequence to use when switching
applications.

Touch

Note:
Tap the taskbar icon to place the popup menu on screen. Tap one of the application icons in the
popup menu. The selected application is brought to the foreground while the other application
continues to run in the background. Stylus taps affect the application running in the foreground
only.
E-EQ-MX8RG-C
AppLock is installed and running on the mobile device. AppLock
restricts User access to running programs. Changes or modifications
require Administrator access. Refer to Chapter 6 – AppLock for setup
and processing information.
Tap File | Exit to close the RFTerm application. When installed,
RFTerm runs upon each cold boot and warm boot. Suspend/resume
does not activate RFTerm, if it was not running when Suspend mode
initiated.
There may be small delays while the wireless client connects to the
network, authorization for Voxware-enabled applications complete,
Wavelink Avalanche management of the MX8 startup completes, and
Bluetooth relationships establish or re-establish.
Chapter 6 - AppLock.
The touch panel must be enabled.
13
Note: The
MX8 Reference Guide