Stand-Alone Operation; Master/Slave; Display Mode; Software Version - Chauvet Q-SPORT 560 LED User Manual

Stand-alone
Operation

Master/Slave

Display Mode

Software Version

Q-Spot™ 560-LED User Manual Rev. 06
1. Go to MENU > INTRO > RUN.
2. Select a stand-alone operation mode (AUTO 1, AUTO 2, CUSTOM,
SOUND 1, SOUND 2, or TEST).
Of all the stand-alone operation modes indicated above, only "CUSTOM" is editable
(see Edit Custom).
The Master/Slave mode enables one or more Q-Spot™ 560-LED products (the slaves) to
simultaneously duplicate the output of another Q-Spot™ 560-LED (the master), without a
DMX controller, whether in auto/custom or static modes,.
1. Set the master unit
:
a) Select a stand-alone mode, as indicated above.
2. Set each of the slave units:
a) Go to MENU > INTRO > RUN.
b) Select SLAVE.
 Do not connect a DMX controller to the master or slave products.
 The master unit should be the first unit in the DMX daisy chain.
1. Go to MENU > INTRO > DISPLAY.
2. Select a display mode (60 CLOSE or BRIGHT).
 When in the "60 CLOSE" setting, the LCD's backlight will turn off after 60 s.
 When in the "BRIGHT" setting, the LCD's backlight will stay on.
1. Go to MENU > INTRO > INFO.
2. The display will show Edition.
3. Press <ENTER> to see the installed software version.
Operation
-13-