Operating Instructions; Navigating The Control Panel; Operating Modes; Master/Stand-Alone Operation - Chauvet Q-Wash LED User Manual

4. O
PERATING

Navigating the Control Panel

Access control panel functions using the four panel buttons located directly underneath the LCD
Display.
Button
<MODE>
<UP>
<DOWN>
<ENTER>
The Control Panel LED Display shows the menu items you select from the menu map on page 15.
When a menu function is selected, the display will show immediately the first available option for the
selected menu function. To select a menu item, press <ENTER>.
Press the <MODE> button repeatedly until MENU appears on the top line of the display. This is the
top of the menu map. What appears on the bottom line of the display is one of the four choices in the
menu map. Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press
the <ENTER> button to access the menu function currently displayed or to enable a menu option. To
return to the previous option or menu without changing the value, press the <MODE> button.

Operating Modes

Master/Stand-alone Operation

This mode allows the unit to operate either as a stand-alone unit, or as the master of one or more
Menu
slave units.
Run
1) In the menu, select "Run".
2) Scroll through and select a program. The program options are: "Auto1", "Auto2", "Sound1",
"Sound2", and "Custom". Select the desired program from the available options. That program
Run
will then begin running.
(Auto1,
Auto2,
3) For Master operation, use standard DMX cables to daisy chain your units together via the DMX
Sound1,
connector on the rear of the units. For longer cable runs we suggest a terminator at the last
Sound2,
fixture. For more information about terminators, see page 8.
or
Custom)
Program
Auto1
Auto2
Sound1
Sound2
Custom
Q-Wash LED User Manual
I
NSTRUCTIONS
Function
Used to access the menu or to return to a
previous menu option
Scrolls through menu options in ascending
order
Scrolls through menu options in descending
order
Used to select and store the current menu
or option within a menu
Program that runs on a predetermined time interval that is fixed.
Program that runs on a predetermined time interval that is fixed.
Same as "Auto1", except that each step of the program occurs
when a beat is detected from the built-in microphone.
Same as "Auto2", except that each step of the program occurs
when a beat is detected from the built-in microphone.
User-programmable scene, which can be programmed by following
the instructions on page 11.
MODE
Description
10
UP DOWN ENTER
12/11/2006/11:35