Operation; Stand-Alone Operation (Sound_Active, Auto Mode); Master-Slave Operation (Master_Sound, Master_Auto) - Chauvet Scorpion Scan LG-60 User Manual

Operation

Stand-Alone Operation (Sound_Active, Auto Mode):

This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto
Mode.
1) Set dipswitches position to Sound Active or Auto Mode.
Mode
Sound Active
Auto Mode
2) The unit will react to the low frequencies of music via the internal microphone in Sound Active
mode, or the unit will auto change in Auto Mode.
3) Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in
Sound Active.
N: SOUND/AUDIO

Master-Slave Operation (Master_Sound, Master_Auto):

This mode will allow you to link up to 32 units together without controller.
1) Use standard XLR DMX cables to daisy chain your units together via the XLR connector on the
rear of the units. For longer cable runs we suggest a terminator at the last fixture.
2) Choose a unit to function as Master mode. Turn dipswitches to the Master position on the unit.
The unit must be first unit in line. Then simply chain the units together using XLR cable.
Mode
Master Sound
Master Auto
3) Turn switch to the Slave position on the slave units, and they will react the same as the Master.
Mode
Slave
OUT
1: MASTER
LG-60 User Manual
Dipswitches
10 = Off, 11 = Off, 12 = Off
10 = Off, 11 = Off, 12 = On
2: SOUND/AUTO
Dipswitches
10 = Off, 11 = On, 12 = Off
10 = Off, 11 = On, 12 = On
Dipswitches
10 = On, 11 = Off, 12 = Off
POWER IN
2: SLAVE
11
Appendix
1: SOUND/AUTO
N: SLAVE
11/14/2007 6:04:00 PM