Scanning Area - Canon LASERBASE MF6500 Series Basic Manual

4
Pull out the multi-purpose tray
extension until it clicks, then
open it.
5
Load a sheet of blank A4 paper.
6
Press [ ] or [
<FIX. UNIT CLEANING>, then
press [OK].
Cleaning starts. When finished, the display
returns to standby mode.
NOTE
– Use standard paper as the cleaning
paper.
– Throw away the cleaning paper after use.
11-5

Scanning area

Keep the scanning area clean to avoid
dirty copies or faxes to be sent.
● Platen glass
1
2
] to select
Open the platen glass cover.
Clean the platen glass and the
underside of the platen glass
cover with a cloth dampened
with water. Then wipe the area
with a soft, dry cloth.
NOTE
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.