Canon LASERBASE MF6500 Series Basic Manual page 166

PRINTER SETTINGS
10.PCL SETTINGS***
1. ORIENTATION
2. FONT NUMBER
3. POINT SIZE
4. PITCH
5. FORM LINES
6. SYMBOL SET
7. CUSTOM PAPER
OFF
ON
1. UNIT OF
MEASURE
2. X DIMENSION
3. Y DIMENSION
Sets the PCL printer setting.
Sets the paper orientation.
– PORTRAIT
– LANDSCAPE
Sets the default font typeface for the printer function using
the corresponding font numbers. (0-120)
Specifies a point size for the default font. This item appears
when the number in <FONT NUMBER> is that of a
proportionally spaced scalable font. (4.00-999.75)
Specifies the pitch for the default font. This item appears
when the number in <FONT NUMBER> is that of a fixed
pitch scalable font. (0.44-99.99)
Sets the number of lines to be printed on a page. (5-128)
Selects the symbol set most suited to the needs of the host
computer.
Sets whether to use a custom paper size.
Disables you to specify a custom paper size.
Enables you to specify a custom paper size.
Selects the unit of measurement to specify a custom paper
size.
– MILLIMETERS
– INCHES
Specifies the horizontal size of the custom paper.
(127-356 mm (05.00-14.00 inches))
Specifies the vertical size of the custom paper.
(76-216 mm (03.00-08.50 inches))
13-22