Canon LASERBASE MF6500 Series Basic Manual page 177

SYSTEM SETTINGS
2. IP ADDRESS
3. SUBNET MASK
4. GATEWAY
ADDRESS
5. USE LPD
6. RAW SETTINGS
ON
1. PORT NO.
2. USE
BIDIRECTIONAL
OFF
7. USE HTTP
13-33
Registers a fixed IP address to the machine. (See
"Installing/Uninstalling Software," in the Starter Guide.)
Registers a fixed subnet mask to the machine.
Registers a fixed gateway address to the machine.
Sets whether to use LPD as the print application.
– ON (PORT NO.)
– OFF
Sets whether to use RAW as the print application.
Enables to use RAW.
Enters the port number.
Sets whether to use bi-directional communication.
– ON
– OFF
Disables to use RAW.
Sets whether to activate HTTP (HyperText Transfer Protocol)
for the Remote UI.
– ON (PORT NO.)
– OFF