System Settings - Canon LASERBASE MF6500 Series Basic Manual

SYSTEM SETTINGS

5. R-KEY SETTING
7. REMOTE UI****
8. ACCESS TO DEST.*
1. RESTRICT NEW ADD.
2. FAX DRIVER TX
9. CHECKING THE LOG
ON
OFF
10.USE DEVICE USB
* MF6550/MF6560PL/MF6580PL Only
**** MF6580PL Only
Registers the [R] key to access an outside line easily. (See
Chapter 1, "Advanced Fax Features," in the Advanced
Guide.)
– PSTN
– PBX (HOOKING/PREFIX)
Sets whether to activate the Remote UI function to operate
the machine and change settings.
– ON
– OFF
Sets restriction of the access to destinations.
Sets whether to restrict registering or changing destinations
for one-touch and coded speed dialing. Sets whether to
restrict making calls to the destinations not registered for the
speed dialing.
– OFF
1
– ON*
1
* You can still make calls using an external phone if all of the
following conditions are met:
• The machine is in Sleep mode
• <RX MODE> is set to <FaxOnly>
• <ENERGY IN SLEEP> is set to <LOW>
Sets whether to restrict sending faxes from a computer
using the fax driver.
– ON
– OFF
Sets whether to allow displaying the log.
Enables confirmation of logs using [System Monitor].
Disables confirmation of logs using [System Monitor].
Activity Report will not be printed automatically.
Sets whether to restrict jobs through the USB interface.
– ON
– OFF
13-38