Canon LASERBASE MF6500 Series Basic Manual page 156

FAX SETTINGS (MF6550/MF6560PL/MF6580PL Only)
Setting Item
1. RX MODE
2. USER SETTINGS
1. UNIT TELEPHONE #
2. UNIT NAME
3. TX TERMINAL ID
ON
1. PRINTING
POSITION
2. TELEPHONE #
MARK
OFF
4. SCANNING DENSITY
Selects the receive mode. (See "Set the Machine for
Receiving Faxes," in the Starter Guide.)
– FaxOnly
– FaxTel
– AnsMode
– Manual
Specifies the basic operation settings in the fax mode.
Registers your fax number. (See "Set the Machine for
Sending Faxes," in the Starter Guide.)
Registers your name/company name. (See "Set the
Machine for Sending Faxes," in the Starter Guide.)
Sets the options for sender information.
Sender information is printed in small type at the top of each
page.
Selects where the sender information is printed in small type
at the top of each page.
– OUTSIDE IMAGE
– INSIDE IMAGE
Prefixes your number with the abbreviations FAX or TEL in
your sender information.
– FAX
– TEL
Sender information is not printed.
Adjusts the scanning density for sending a fax. (1-9)
Description
13-12