Error Codes (Mf6550/Mf6560Pl/Mf6580Pl Only) - Canon LASERBASE MF6500 Series Basic Manual

Error Codes
An error code is a four-digit code shown on an ERROR TX REPORT or an ERROR
RX REPORT when an error occurs.
31/12 2006 10:50 FAX 123XXXXXX
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
RECIPIENT ADDRESS
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
For details on reports, see Chapter 6, "Reports and Lists," in the Advanced Guide.
See the table below for individual error codes.
Error Code
#0001 A document may be jammed.
#0003 – An attempt was made to send a
document of 630 mm or longer
from the ADF.
– A document takes a long time to
send because it contains too
much data.
– A document takes a long time to
receive.
12-11
(MF6550/MF6560PL/MF6580PL Only)
CANON
***************************
*** ERROR TX REPORT
***************************
0005
111XXXXX
31/12 10:50
00'00
0
NG
Description
***
# 0018 BUSY/NO SIGNAL
Error Code
Action
Remove the jammed document.
– Divide the document into smaller
parts and send from the platen
glass.
– Reduce the scanning resolution
before sending.
– Contact the other party and ask
them to reduce their scanning
resolution or divide the document
into smaller parts for sending.
001