Remote Ui (Mf6580Pl Only) - Canon LASERBASE MF6500 Series Basic Manual

Remote UI
(MF6580PL Only)
Follow this procedure for Remote UI management.
For details, see Chapter 4, "Remote UI," in the Advanced Guide.
1
Prepare the Network
Set up the machine for use in a TCP/
IP network, then connect the
machine and the PC to your network
router or a hub.
For details, see "Installing/Uninstalling Software," in the
Starter Guide.
10-1
2
Startup
Start the web browser, enter the IP
address of the machine, then press
[Enter] on the keyboard