Bayer HealthCare Contour User Manual page 22

If you do not want to mark the test result:
Remove the used test strip to automatically save the test
result in the meter memory with no markers. Dispose of the
used test strip and lancet properly. This will also turn the
meter off.
If you want to mark the test result:
Before you remove your test
strip, press ▲ or ▼ to select
the marker you want to set. The
marker will flash.
To mark a result with the
pre-meal marker, press M
when the
The
This feature allows you to set
an alarm to remind you to run a
post-meal test.
The alarm is available only after
setting a pre-meal marker.
If you want to set the alarm,
press M. The
and stop flashing.
If you do not want to set the
alarm, press ▲ or ▼ and the
will disappear. Press M
to set.
To mark a result with the post-meal marker, press ▲ or ▼
until the
To mark a result with the logbook, press ▲ or ▼ until the
flashes. Press M to set.
20
flashes.
will then flash.
will appear
flashes. Press M to set.
Need Help? Call toll free: 1-800-348-8100