Bayer HealthCare Contour User Manual page 11

Twist off the round protective
lancet cap. Be sure to save
it for disposing of the used
lancet.
Replace the gray endcap
prior to getting your blood
drop.
Remove a test strip from the
bottle. Tightly close the
bottle lid immediately
after you have removed
the test strip.
NOTE: Check the expiration and discard dates on the bottle.
Make sure the test strip does not appear torn or damaged.
Hold the test strip with the
gray end facing up.
Insert the gray end into the
test strip port on the meter.
The meter will turn on. An image of a test strip with a flash-
ing blood drop will appear letting you know the meter
is ready to test.
9
www.bayerdiabetes.com/us