Control Solution Testing - Bayer HealthCare Contour User Manual

Control Solution Testing:

Use only Bayer's C control solutions (Normal,
ONTOUR
Low, or High) to practice on the system or to run a
check to make sure the meter and the test strips are
working properly. Using anything other than C
ONTOUR
control solution could present incorrect results.
Remove a test strip from the bottle. Tightly close the
bottle lid immediately after you have removed the
test strip.
NOTE: Check the expiration and discard dates. Make sure
the test strip does not appear torn or damaged.
Hold the test strip with the
gray end facing up.
Insert the gray end into the
test strip port on the meter.
The meter will turn on. An
image of a test strip with
a flashing blood drop will
appear letting you know the
meter is ready to test.
30
Need Help? Call toll free: 1-800-348-8100