Avaya 1140E User Manual page 20

20 Chapter 3 Configuring options
When you do not want to use Bluetooth wireless technology
If a wireless headset is connected, and you want to use the wired headset, you can switch between
the two. It is not necessary to unpair or disable the Bluetooth wireless technology feature.
To switch between a wired headset and wireless headset:
Double-press the
1
Press the Left/Right navigation key to select the Use BT Headset item.
2
Press the Enter key to toggle this option on or off.
3
A check mark indicates that the wireless headset is used. Clear the check mark to use a wired
headset. On (
To unpair a Bluetooth wireless technology headset:
Double-press the
1
Press the Right navigation key to select the Paired: item.
2
Choose one of the following:
3
• If your headset is displayed in the Paired combo box, proceed to step 5.
• If more than one device is paired, and your headset is not already displayed in the Paired
combo box, do the following:
Press the Right navigation key to select the Paired: combo box. Press the Enter key to
a
open edit mode.
b Press the Up/Down navigation keys to open the list. Press the Up/Down navigations key
to scroll in the list and highlight your headset.
Press the Enter key to select the headset and close the combo box. Press the Enter key to
c
exit edit mode.
Press the Right navigation key to select the UnPair button (next to the UnPair Device item).
4
Press the Enter key.
5
Your wireless headset is unpaired and removed from the Paired: item's list.
NN40050-105 NN40050-105
Note: You can switch between a wired and wireless headset and back
again either when the phone is idle or during an active call.
(Headset) key to open the 3. Bluetooth Setup dialog box.
) by default.
o
(Headset) key to open the 3. Bluetooth Setup dialog box.
Note: Your wireless headset is no longer paired with your phone, and the
wired headset can be used. To use the wireless headset again, you must
perform the pairing and activation procedure.