Table of Contents
Advertisement
8.3 SNMP Settings
Click on the SNMP Settings link under the Management menu. This is a networking management
protocol used to monitor network‐attached devices. SNMP allows messages (called protocol data
units) to be sent to various parts of a network. Upon receiving these messages, SNMP‐compatible
devices (called agents) return data stored in their Management Information Bases.
SNMP Enable/Disable
Contact
Location
Community Name
Community Name
Trap Destination IP
Address
Trap Destination
Community Name
Apply / Cancel
Select the Radio button to Enable or Disable SNMP function.
Specify the contact details of the device.
Specify the location of the device.
Specify the password for access the SNMP community for read only access.
Specify the password for access the SNMP community for read and write access.
Specify the IP address that will receive the SNMP trap.
Specify the password of the SNMP trap community.
Press Apply to apply the changes or Cancel to return previous settings.
52
Advertisement
Table of Contents
