Refresh
Auction: If the Access Point is suppressed its own SSID, SSID section will be blank, the SSID must be
filled in manually.
4.2.3 WDS Bridge Mode
Wireless Mode
Channel / Frequency
Apply / Cancel
MAC Address
Mode
Apply / Cancel
Auction: The Access Point that you would like to extend the wireless area must enter your Access
Point's MAC address. Not all Access Point supports this feature.
Press Refresh to scan again.
Select the desired 802.11 standard modes or SuperG mode. There are four different
modes and they are 802.11b, 802.11g Only, 802.11 b/g mixed and SuperG.
The channel availability is based on the country's regulation.
Press Apply to apply the changes or Cancel to return previous settings.
Enter the Access Point's MAC address that you would like to extend the wireless area
into the MAC address filter.
Select Disable or Enable from the drop down list.
Press Apply to apply the changes or Cancel to return previous settings.
17