Table of Contents
Advertisement
4.4 Wireless Advanced Settings
Data Rate
Transmit Power
Fragment Length
RTS/CTS Threshold
Protection Mode
WMM
Channel Bandwidth
Distance
Wireless Traffic Shaping
Incoming Traffic Limit
Outgoing Traffic Limit
Select Data Rate from the drop down list.
Select Transmit Power to increase or decrease Transmit Power.
Specify package size during transmission. This value changed only when you
experienced high error rate.
Specify Threshold package size for RTC/CTS.
Select Disable or Enable Protection Mode.
Select Disable or Enable WMM function. WMM is based on the four Access
Categories: voice, video, best effort and background. WMM function is not used to
guarantee transmission speed.
Select Channel Bandwidth from the drop down list. Decrease channel bandwidth
may cause lower throughput but less collision.
Specify distance rage between AP and Clients. Longer distance may lose high
connection speed.
Place a Check to enable Wireless Traffic Shaping function.
Specify the wireless transmission speed for downloading.
Specify the wireless transmission speed for uploading.
29
Advertisement
Table of Contents
