Refresh
Auction: If the Access Point is suppressed its own SSID, SSID section will be blank, the SSID must be
filled in manually.
4.2.5 AP Router Mode
Wireless Mode
Channel / Frequency
Auto
AP Detection
Current Profile
Profile Isolation
Press Refresh to scan again.
Select the desired 802.11 standard modes or SuperG mode. There are four different
modes and they are 802.11b, 802.11g Only, 802.11 b/g mixed and SuperG.
The channel availability is based on the country's regulation.
Place a Check to enable Auto channel selection.
AP Detection can help to select a best channel by scan nearby area.
Configure up to four different SSIDs, it can help to divide group of clients to access
the network. Press Edit to configure the profile and place a Check to enable extra
SSID.
Restricted Client to communicate with different VID by Selecting the Radio button.
19