Table of Contents
Advertisement
Display panel
Description
Bezel
For products with an HD camera
For products with a 3D camera
Display panel
15.6" FHD AG UWVA 220 eDP, Slim
15.6" UHD AG UWVA 300 eDPU Slim
15.6" 1920x1080 AG UWVA 220 eDPU Slim (limited to China localization only)
Hinge assembly
Hinge cap assembly
Display cable
FHD display cable for products with an HD camera
FHD display cable for products with a 3D camera
UHD display cable for products with an HD camera
UHD display cable for products with a 3D camera
WLAN antenna
Back cover
In Hybrid Green finish, with antenna
In Shadow Mesh finish, with antenna, for products with HD camera
In Shadow Mesh finish, with antenna, for products with 3D camera
IMPORTANT:
and replacement.
Before removing the display assembly, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery (see
Display assembly (see
▲
Remove the display panel:
1.
Use a thin plastic tool to disengage the bezel starting on the top edge (1). Continue on the left and right
edges (2) and then bottom edge (3), and then lift the display bezel (4) to remove it.
60
Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
Display assembly on page
32).
34), and then remove the following components:
37).
Spare part number
856725-001
856726-001
752920-014
842484-004
915613-001
856741-001
859737-001
856733-001
856734-001
856735-001
856736-001
856923-001
905115-001
856715-001
856718-001
Advertisement
Table of Contents
