Accessories - Grindmaster Crathco MG235-2B Operation And Instruction Manual

Accessories (not included)
Security Kit Installation (Part # 3468)
Installing Locking Clip
1. Pinhead must be located on righthand side of valve,
as shown.
2. The 0.125" slot, on the locking clip, lines up with
the horizontal shelf on the valve body.
3. Insert the locking clips as shown.
4. Attach padlock in hole provided on the locking clip.
Installing Security Straps
1. Hook straps under side edge of the bowl,
beginning at the front of the bowl.
2. Slide the straps back on the bowl until the
are firmly in place
3. Interlock straps above the bowl lid.
4. Attach the padlock.
Autofills
Attach liquid autofill systems to your granita dispenser.
Autofills minimize manual labor to mix and refill the unit, as well as maintain
the product bowl at an attractive level.
BIB Product
(Figure RR)
Contact your local Grindmaster Corporation representative or
Grindmaster Corporation customer service at (800) 695-4500
for more information on any of the above accessories.
Page 16
Product Filling
System
Product Delivery
System
Water line
PULL HANDLE
LOCKING CLIP
HORIZONTAL
SHELF
VALVE BODY
0.125"
SLOT
PIN HEAD
LOCKING CLIP IN
LOCK POSITION
(Figure PP)
SECURITY STRAP
(Figure QQ)
G & MG Series Granita Machine
HOLE FOR
PADLOCK
GRANITA BOWL