Introduction; Unpacking - Tannoy VLS SERIES Operation Manual

2. Introduction

2. Introduction
The latest addition to Tannoy's extensive line of column loudspeakers, VLS Series introduces another
proprietary Tannoy innovation: FAST™ (Focussed Asymmetrical Shaping Technology). By combining
transducer technology from the acclaimed QFlex Series with an innovative new passive crossover design,
FAST provides exceptional acoustical benefits, including an asymmetrical vertical dispersion pattern which
gently shapes acoustical coverage toward the lower quadrant of the vertical axis.
The VLS Series comprises three models. The VLS 7 (7 × 3.5" LF) is designed for speech-only applications
while VLS 15 (7 × 3.5" LF with 8 × 1" HF) and VLS 30 (14 × 3.5" LF and 16 × 1" HF) are designed for more
demanding full-range music applications as well as speech. All are IP65 rated for dust and water ingress, are
resistant to salt spray and UV, and have been subjected to rigourous high/low operational temperature and
humidity testing. VLS Series loudspeakers are suitable for both indoor applications (house of worship, retail
malls, auditoria) as well as covered outdoor use (transport hubs, concourses). Easy mounting is facilitated via
supplied wall and flying brackets, with an optional pan-tilt bracket available.
Aided by an addition of an exclusive Tannoy edition of EASE Focus v2.0 software, aconsultants can
design systems with predictable results and also specify VLS Series in conjunction with Tannoy's existing
column loudspeakers – including I Series and QFlex – within the familiar environs of an industry standard
software wizard.
VLS Series loudspeakers can easily be switched from low-impedance mode (6 ohms for VLS 30, 12 ohms for
VLS 7 and VLS 15) to 70/100 V distributed line operation. For quick and simple commissioning, this selection is
made (along with the transformer tapping options) via a single rotary switch located on the rear termination.
For applications requiring extended low frequency enhancement, a range of Tannoy sub-bass systems are
available for use in conjunction with the VLS Series.

3. Unpacking

Each Tannoy VLS Series loudspeaker is carefully tested and inspected prior to shipment. After unpacking,
please inspect for any exterior physical damage, and save the carton and any relevant packaging materials
in case the loudspeaker again requires packing and shipping. In the event that damage has been sustained
in transit, please notify your dealer and the shipping carrier immediately.
4
VLS Series Operation Manual rev 1.0.0