Passive column array loudspeaker with 15/30 drivers and fast dispersion, control for installation applications/en 54-24 certified, passive column array loudspeaker with 7 full range drivers and fast dispersion, control for installation applications en 54- (12 pages)
This Quick Start Guide presents only the essential information required to properly unpack, connect and configure a VLS Series loudspeaker. Please consult the full VLS Series Operation Manual for additional detailed information on low impedance versus 70.7/100 V operation, complex loudspeaker system configuration, cable types, equalization, power handling, rigging and safety procedures, and warranty coverage.
(-) terminal. The other parallel barrier strip is available for connecting All VLS Series models can be operated as additional loudspeakers. either an 8 ohm low impedance loudspeaker or within a 70.7/100 V distributed system.
(70 V or 100 V) with available transformer with simplified mounting in many applications. taps. When using VLS Series loudspeakers in The vertical dispersion of the VLS 7 and distributed line systems, the transformer can...
Rigging and safety Flying Bracket – Each VLS Series loudspeaker procedures is also supplied with a flying bracket. The bracket is attached to the top two inserts (see below) using the supplied M6 screws. The two bottom inserts can be used as pull...
Need help?
Do you have a question about the VLS SERIES and is the answer not in the manual?
Questions and answers