Technical Specifications - Tannoy VLS SERIES Operation Manual

10. Technical specifications

Peformance
Frequency Response (-3 dB)
1)
Frequency Range (-10 dB) 1)
System Sensitivity (1 W @1 m)
2)
Horizontal dispersion (-6 dB)
Vertical dispersion (-6 dB)
Driver complement
Crossover
Directivity factor (Q)
Directivity index (DI)
Rated maximum SPL 2)
Power handling
Recommended Amplifier Power
Nominal Impedance
Construction
Enclosure
Finish
Connectors
Fittings
Physical
Dimensions
Packed quantity
Net weight
Shipped weight
(1) Average over stated bandwidth. Measured at 1 metre on-axis.
(2) Unweighted pink noise input,measured at 1 metre in an anechoic chamber
A full range of measurements and performance data can be downloaded from www.tannoy.com. For project-specific system design assistance, contact our Applications Engineering and
Training (AET) group via www.aetgroup.tc
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods may introduce variances; however, performance will
always equal or exceed the published specifications. All specifications are subject to change without notice. FAST is a trademark of Tannoy Limited. All other trademarks remain the
property of their respective owners.
VLS 7
150 Hz - 11 kHz
110 Hz - 14 kHz
90 dB
130 degrees horizontal
+ 6 degrees / - 22 degrees
(-8 degree bias)
7 x 3.5" (89 mm) full range drivers
Passive network utilising
Focussed Asymmetrical Shaping
Technology (FAST)
6.1 averaged 1 kHz to 10 kHz
7.9 averaged 1 kHz to 10 kHz
112 dB (average), 118 dB (peak)
150 W (average),
300 W (programme),
600 W (peak)
450 W @ 8 ohms
12 ohms
Aluminium extrusion
Ral 9003 (white)
& Ral 9004 (black)
Custom RAL finishes available
(additional cost and lead-time)
Barrier strip
Flying bracket, wall mount bracket,
input panel cover plate and gland
W: 121 mm (4.8")
H: 816.5 mm (32.1")
D: 146 mm (5.7')
1
10.4 kg (22.9 lbs)
13 kg (28.7 lbs)
VLS 15
150 Hz - 30 kHz
110 Hz - 35 kHz
91 dB
130 degrees horizontal
+ 6 degrees / - 22 degrees
(-8 degree bias)
7 x 3.5" (89 mm) woofers
8 x 1" (25 mm) metal dome tweeters
Passive network utilising
Focussed Asymmetrical Shaping
Technology (FAST)
9.1 averaged 1 kHz to 10 kHz
9.6 averaged 1 kHz to 10 kHz
114 dB (average), 120 dB (peak)
200 W (average),
400 W (programme),
800 W (peak)
600 W @ 8 ohms
12 ohms
Aluminium extrusion
Ral 9003 (white)
& Ral 9004 (black)
Custom RAL finishes available
(additional cost and lead-time)
Barrier strip
Flying bracket, wall mount bracket,
input panel cover plate and gland
W: 121 mm (4.8")
H: 816.5 mm (32.1")
D: 146 mm (5.7')
1
11.3 kg (24.9 lbs)
14 kg (30.9 lbs)
VLS Series Operation Manual rev 1.0.0
10. Technical specifications
VLS 30
120 Hz - 22 kHz
90 Hz - 35 kHz
94 dB
130 degrees horizontal
+ 3 / - 11 degrees Vertical
(-4 degrees bias)
14 x 3.5" (89 mm) woofers
16 x 1" (25 mm) metal dome tweeters
Passive network utilising
Focussed Asymmetrical Shaping
Technology (FAST)
15 averaged 1 kHz to 10 kHz
11.8 averaged 1 kHz to 10 kHz
120 dB (average), 126 dB (peak)
400 W (average),
800 W (programme),
1600 W (peak)
1200 W @ 4 ohms
6 ohms
Aluminium extrusion
Ral 9003 (white)
& Ral 9004 (black)
Custom RAL finishes available
(additional cost and lead-time)
Barrier strip
Flying bracket, wall mount bracket,
input panel cover plate and gland
W: 121 mm (4.8")
H: 1460.5 (57.5")
D: 146 mm (5.7')
1
20 kg (44 lbs)
23 kg (50.7 lbs)
13