Rosslare HomeLogiX HLX-40 User Manual page 17

Key
0
normal
mode only
1
normal
mode only
2
normal
mode only
3
normal
mode only
4
normal
mode only
5
normal
mode only
6
normal
mode only
HomeLogiX, HLX-40 User Guide
Press to
Memory Display
Press once to display the alarms caused
during the last arming period per zone. The
first line of the displays shows the alarm
memory, and the second line shows the
zone description, event and time.
Press Enter
to toggle view between zone
description and the Time & Date.
Menu
Press to display the next event.
Esc
Press to exit.
You can also use
typing an entry.
PGM ON
- if enabled by installer
Press once to enter PGM activation mode,
the PGM status is indicated on the right.
1 to activate PGM 1 and/or 2
Press
activate PGM 2.
PGM OFF
- if enabled by installer
Press once to enter PGM deactivation
mode, the PGM status is indicated on the
1 to deactivate PGM 1 and/or 2
right. Press
to deactivate PGM 2.
Chime ON/OFF
Manually toggle the chime on and off (if
enabled by the installer) The default is off.
Volume
Manually Adjust the system's volume level.
Sound ON/OFF
- if enabled by installer
Manually toggle voice messages, keypad
tone, and other sounds on and off. (except
for trouble beeps, forced arming,
enrollment and RF test of wireless devices
which is always on)
Bypass
- if enabled by installer
Enter the last User menu Bypass option to
arm the system by bypassing active zones.
You must enter a user or master code.
System Overview
0
to insert a space when
to
Page 16