Vello Freewave User Manual page 15

BULB MODE (LONG EXPOSURE) | WIRED
1. Power up your camera and set it to
Bulb Mode. The Receiver does not
need to be on, but because the
Receiver does not need power in
wired mode, the LEDs will not light.
2. Set the Receiver to Ready.
3. Press the Receiver's shutter release
button halfway to wake or focus the
camera (if set to Auto Focus). The
con rmation LED will not display, so
be sure to focus manually or allow
the camera to Auto Focus without
con rmation.
4. Fully depress the Receiver's shutter
button to take the shot. The shutter
will stay open as long as the shutter
button is pressed.
Sliding the Receiver switch to the Hold
position will keep the shutter open until
the switch is returned to the Ready
position.
15
© Fotoquintero