Vello Freewave User Manual page 11

CONTINUOUS MODE / WIRELESSLY
1. Turn on the Receiver by pressing and
holding the Set/Power button until
the left red LED comes on.
2. Set the Receiver to Ready and the
Transmitter to Cont.
3. Press the Transmitter's shutter
release button halfway to focus the
camera (if set to Auto Focus). The
LED will turn green.
4. If your camera is set to Single Shot
Mode, a full press of the Transmitter's
shutter button will trigger the camera
to take ve photos.
If your camera is set to Continuous
Mode, a full press of the Transmitter's
shutter button will trigger the camera
to take continuous photos until you
release the shutter button.
11
To lock in Continuous Mode: Set the
Receiver to Ready and the Transmitter
to Single/Bulb. Set your camera to
Continuous Mode. Fully press the
Transmitter shutter button for four
seconds. The camera will continue to
take photos until you press the shutter
button again.