Vello Freewave User Manual page 12

BULB MODE (LONG EXPOSURE) | WIRELESSLY
1. Set your camera to Bulb mode.
2. Turn on the Receiver by pressing and
holding the Set/Power button until
the left red LED comes on.
3. Set the Receiver to Ready and the
Transmitter to Single/Bulb.
4. Press the Transmitter's shutter
release button halfway to wake or
focus the camera (if set to Auto
Focus). The LED will turn green.
5. Fully depress the Transmitter's
shutter button for three seconds
until the red LED on the Transmitter
turns off. The shutter will remain
open until you half-press or full-press
the shutter button again.
12