Vello Freewave User Manual page 14

CONTINUOUS MODE | WIRED
1. Power up your camera and set it to
Continuous Mode. The Receiver
does not need to be on, but because
the Receiver does not need power in
wired mode, the LEDs will not light.
2. Set the Receiver switch to Ready.
3. Press the shutter release button
halfway to wake or focus the camera
(if set to Auto Focus).
The con rmation LED will not
display, so be sure to focus manually
or allow the camera to Auto Focus
without con rmation.
4. A full press of the shutter button will
trigger the camera to take
continuous photos until you release
the shutter button.
14
You can also take continuous photos by
moving the Receiver switch to the
Hold position. The camera will take
photos until you move the switch back
to the Ready position.