Treadbelt Adjustment - True z4 Owner's Manual

Treadbelt Adjustment

Do not tighten any pedestal or handrail screws until
instructed.
Step 5: The proper side of each handrail is designated by a
label. Install the handrails by sliding over the handrail stub
next to the handlebar. Install two 2mm x 15mm screws at the
top of each handrail. Install one 8mm x 50mm screw through
the handrail clamp and into the bottom of the handrail as
shown. Tighten all pedestal and handrail screws.
Step 6: Reinstall the motor cover using the Philips
screwdriver. Place the safety key on the circle labeled Safety
Key on the console.
Treadbelt Adjustment
Your treadmill's running belt has been properly aligned at
the factory. However, when the treadmill is used on an
uneven surface, please follow these instructions:
7