Table of Contents
Advertisement
Overseas Mode
Sometimes, when sending a fax to overseas numbers, problems may be experienced. This mode
makes the MFC work better for such calls.
After you send a fax using this feature, the feature turns itself off.
1
Insert the document face up in the feeder, or face down on the glass platen.
2
Press Menu, 1, 3, 5.
3
to select ON (or OFF), and press Set when the screen displays your selection.
Press
or
4
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you are finished choosing settings and go to Step 5.
5
Enter the fax number you're calling, and press Start.
Delayed Transmission (Timer) (Not Available for Colour Fax)
You can use this function to send a fax up to 24 hours later.
1
Insert the document face up in the feeder, or face down on the glass platen.
2
Press Menu, 1, 3, 6.
3
Enter the time you want the fax to be sent, in 24-hour format (for example, enter 19:45 for 7:45
PM), and press Set.
4
Press 1 if you want to select additional settings. The
display returns to the SETUP SEND menu —OR—
Press 2 if you are finished choosing settings and go to
Step 5. The screen prompts you to enter the fax number.
5
Enter the fax number, and press Start. The MFC will wait until the time you have entered to
send the fax.
Delayed Batch Transmission
Before sending the delayed faxes, your Brother machine will economize by sorting all the documents
in memory by destination and scheduled time. All delayed faxes scheduled at the same time to the
same fax number will be sent as one transmission.
1
Press Menu, 1, 3, 9.
2
Press
or
to select ON (or OFF) and press Set.
3
Press Stop to exit.
36
Chapter 5
ENTER FAX NO.
THEN PRESS START
BATCH TX:ON
SELECT { } & SET
Advertisement
Table of Contents
