Polling Transmit (Not Available For Colour Fax) - Brother MFC-860 Owner's Manual

Sequential Polling
Your MFC can request documents from several fax units in a single operation. You just specify
several destinations in Step 4. Afterwards, a Sequential Polling Report will be printed.
1
Press Menu, 1, 2, 6. The screen displays
2
Press or to choose STANDARD, SECURE or
TIMER, and press Set when the screen displays the
setting you want.
3
If you selected STANDARD, the screen prompts you to enter the fax number you want to poll,
and then to press Start.
• If you selected SECURE, enter a four-digit number and press Set.
• If you selected TIMER, enter the time (in 24-hour format) you want to begin polling and
press Set.
4
Specify the destination fax machines, which you wish to poll by using One Touch, Speed Dial,
a Group, Tel-Index or the dial pad. You must press Set between each location.
5
Press Start.
Your MFC polls each number or group number in turn for a document.

Polling Transmit (Not Available for Colour Fax)

Polling Transmit is when you set up your MFC to wait with a document so another fax machine can
retrieve it.
1
Place document in feeder, or on the glass platen.
2
Press Menu, 1, 3, 7. The screen displays
3
to choose STANDARD, and press Set.
Press or
4
Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu
—OR— Press 2 if you choosing setting and go to Step 5.
5
Press Start.
46
Chapter 7
POLLING:STANDARD
POLLING:STANDARD
SELECT { } & SET