Muratec MFX-3550 User Manual page 48

Network setup
3. Double-click Application > SetIP.
4. Double-click Setup.exe to install this program.
5. Click OK. If necessary, select a language from the drop-down list.
6. Follow the instructions in the window and complete the installation.
Starting the program
1. Connect your machine and the computer using crossover network cable.
2. Temporarily disable the computer firewall before continuing by doing the following:
3. From the Windows Start menu, select All Programs > Samsung Network Printer Utilities >
4. Click on the
5. Enter the machine's new information into the configuration window as follows:
6. Click Apply, and then click OK. The machine will automatically print the Network
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
ROM drive.)
SetIP > SetIP.
icon (third from left) in the SetIP window to open the TCP/IP configuration
window.
MAC Address : Find the machine's MAC address from the Network Configuration Report
and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.
MAC address is a hardware serial number of the machine's network interface and can be
found in the Network Configuration Report.
IP Address: Enter a new IP address for your machine. For example, if your computer's IP
address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than
the computer's address.)
Subnet Mask: Enter this exactly the same as the computer's Subnet Mask.
Default Gateway: Enter this exactly the same as the computer's Default Gateway.
Configuration Report. Confirm that all the settings are correct.
manuals search engine
47
Page 12 of 24
8/4/2009