Muratec MFX-3550 User Manual page 40

Network setup
6. Click Apply, and then click OK. The machine will automatically print the Network
7. Click Exit to close the SetIP program.
8. If necessary, restart the computer's firewall.
IP setting using SetIP Program (Macintosh)
For using SetIP program, disable the computer firewall before continuing by performing the
following:
1. Open System Preferences.
2. Click Security.
3. Click the Firewall menu.
4. Turn firewall off.
1. Connect your machine and the computer using network cable.
2. Insert the Installation CD-ROM, and open the disk window. Open the MAC_Installer >
3. Double click the file and Safari will automatically open, then select Trust. The browser will
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
MAC Address : Find the machine's MAC address from the Network Configuration Report
and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.
MAC address is a hardware serial number of the machine's network interface and can be
found in the Network Configuration Report.
IP Address: Enter a new IP address for your machine.
Subnet Mask: Enter a new Subnet Mask for your machine.
Default Gateway: Enter ta new Gateway for your machine.
Configuration Report. Confirm that all the settings are correct.
The following instructions may vary for your model.
MAC_Printer > SetIP > SetIPapplet.html.
manuals search engine
39
Page 4 of 24
8/4/2009