Muratec MFX-3550 User Manual page 185

Troubleshooting
remove received
fax job
Network Error
There is a
problem with the
network.
Network
Problem
Network cable is
not connected.
Check it
Network
Problem
Network card is
not installed.
Check it
No Answer
The remote fax
machine has not
answered
No such job
Original paper
Jam
Output bin Full
Output bin Full.
Remove printed
paper
Paper Empty in
[yyy]
Paper is empty in
[yyy].
Load paper
Paper Jam in
MPT
Paper Jam in
tray 1
Paper Jam in
tray 2
Paper mismatch
[yyy]
Load [zzz][xxx]
Continue
Cancel
Pickup roller is
worn
[yyy] pickup
roller is worn.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/t... www.Manualslib.com
There is a problem with the network.
The machine is not connected with a
network cable.
There is a problem on the network
interface.
The remote fax machine has not
answered after several redial attempts.
You are performing an Add Pages or
Cancel Job operation, but there are no
jobs waiting.
The load original has jammed in the
document feeder.
The document output tray is full.
There is no paper in the tray.
Paper has jammed in the multi-purpose
tray area.
Paper has jammed in the tray1 area.
Paper has jammed in the tray2 area.
The paper sizespecified in the
printerproperties does notmatch the
paper youare loading.
The pickup roller has reached the end of
its lifespan.
manuals search engine
Check the network. If the problem
persists, ask the system
administrator or the person who
has set up your local network..
Connect the machine to the
network with a network cable.
Turn the power switch off and on.
If the problem persists, call for
service.
Try again. Verify the number to
ensure that a fax can be received.
Check the display to see if there
are any scheduled jobs. The
display should indicate if any
scheduled jobs are in Standby
mode, for example, Delay Fax.
Clear the jam. (See
original document
The document output tray can hold
up to 150 sheets of plain paper.
Once the paper is removed from
the
document output tray, the printer
resumes printing.
Load paper in the tray. (See
Loading paper in the
Clear the jam. (See
purpose
Clear the jam. (See
Clear the jam. (See
tray 2.)
You can select the option between
Continue or Cancel. If you select
Cancel , the printing job will stop.
Load the correct paper in the tray.
If you select Continue, printing
job will continue.
This message appears when the
pickup roller is worn. Replace the
pickup roller with a new one. Call
for service.
184
Page 13 of 27
Clearing
jams.)
tray.)
In the multi-
tray.)
In tray 1.)
In optional
8/4/2009