Muratec MFX-3550 User Manual page 117

Scanning
5. Click Add.
6. Select the Index number, from 1 to 20.
7. Enter a name in Alias for the Setup. This name will be displayed on your machine.
8. Select IP Address or Host Name.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 21.
11. Check the box next to Anonymous if you want the FTP server to permit access to unauthorized
people.
This box is unchecked by default.
12. Enter the Login Name and Login Password.
13. Enter the Scan File Folder for saving the scanned image.
14. Click Apply.
Setting up an SMB server
To use an SMB server, you need to set up parameters for access to SMB servers using SyncThru™
Web Service.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > SMB Setup > Server List.
5. Click Add.
6. Select the Index number, from 1 to 20.
7. Enter a name in Alias for the Setup. This name will be displayed on your machine.
8. Select IP Address or Host Name.
9. Enter the server address in dotted decimal notation or a host name.
10. Enter the server port number, from 1 to 65535.
The default port number is 139.
11. Enter the Share name of the server.
12. Check the box next to Anonymous if you want to permit unauthorized persons to access the SMB
server.
This box is unchecked by default.
13. Enter the User Name and User Password.
14. Enter the User Domain.
15. Enter the Scan File Folder for storing the scanned image.
16. Click Apply.
Scanning and sending to SMB/FTP server
1. Make sure that your machine is connected to a network.
2. Load originals face up into the document feeder, or place a single original face down on the
scanner glass..
3. Press Scan/Email on the control panel.
4. Press the up/down arrow to highlight Scan To SMB or Scan To FTP, and press OK.
5. Press the up/down arrow until the server you want highlights and press OK.
6. Press the up/down arrow until the scan format you want highlights and press OK.
The machine begins scanning and then sends the scanned image to the specified server.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com manuals search engine
116
Page 6 of 16
8/4/2009