Muratec MFX-3550 User Manual page 32

Getting started
5. After the installation is finished, a window asking you to print a test page appears. If you choose to
print a test page, select the checkbox and click Next. Otherwise, just click Next and skip.
6. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
If the printer driver does not work properly, uninstall the driver and reinstall it.
For windows follow the steps below to uninstall the driver.
If you want to reinstall the driver over the currently installed driver via the provided CD-ROM,
insert the CD-ROM then, the window with overwriting confirmation message appears. Simply
confirm it to proceed to the next step. Next steps are same as the first installation you have
made.
Macintosh
The software CD that came with your machine provides you with the Driver files that allows you to
use the CUPS driver or PostScript driver (only available when you use a machine which supports the
PostScript driver) for printing on a Macintosh computer.
Also, it provides you with the TWAIN driver for scanning on a Macintosh computer.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
After connecting the machine, click Next.
If you don't want to connect the machine at this time, click Next, and No on the following
screen. The installation will then start and a test page will not be printed at the end of the
installation.
The installation window that appears in this User's Guide may differ depending on the
machine and interface in use.
1. Make sure that the machine is connected to your computer and powered on.
2. From the Start menu, select Programs or All Programs > your printer driver name >
Maintenance.
3. Select Remove and click Next.
You will see a component list so that you can remove any item individually.
4. Select the components you want to remove and then click Next.
5. When your computer asks you to confirm your selection, click Yes.
The selected driver and all of its components are removed from your computer.
6. After the software is removed, click Finish.
manuals search engine
31
Page 6 of 10
8/4/2009