Installation (Vehicle's Brackets); Parts - Virtual Reality VRCD500-SDU Owner's Manual

Am/fm receiver, cd/mp3/wma player with sd card slot, usb port, aux in, & detachable face

Hide thumbs Also See for VRCD500-SDU:

Table of Contents

INSTALLATION

DIN REAR-MOUNT (Method B)

Installation using the screw holes on both sides of the unit.

2 Keys

1 Hex Nut

2 Lock Washers

1 Sheet Metal Screw

1 Metal Support Strap

2 Flat Washers

1 Mounting Bolt

1 Faceplate Case

1 1/8" Stereo Cable

1 Remote Control

(not shown)

1. Screw holes on the side of the unit.

2. Screws. Use either truss screws (5 x

8mm) or flush surface screws (4 x 8mm),

depending on the shape of the screw holes

in the bracket.

3. Vehicle's Factory Mounting Bracket

4. Dashboard or Console

5 Hook (Remove this part)

Note: The mounting sleeve, outer trim

ring, and the mounting strap are not used

for this method of installation.

Table of Contents

Show Quick Links

Table of Contents