Installation (Din Front Mount); Installation (Vehicle's Brackets) - Virtual Reality Multi-Media Headunit VRVD630 Owner's Manual

DIN FRONT-MOUNT (Method A)
BEFORE THE FINAL INSTALLATION OF THE HEAD UNIT, CONNECT THE WIRING
TEMPORARILY, MAKING SURE THE UNIT AND THE SYSTEM WORK PROPERLY.
Fig. 
1. Dashboard
2. Mounting
Sleeve
Follow the diagram in Fig. 
for installing the rear mounting
strap to the head unit. The rear
mounting strap will help keep
the head unit from moving
around inside the dashboard.
Bend the tabs
to secure the
Mounting Sleeve
in the dashboard.
3. Screw
Fig. 2
IMPORTANT!
Insert fingers into the groove in the front
of frame to remove it.
Insert the buttons supplied with the old
unit into the grooves on both sides of the
old unit. The unit can be installed or re-
moved from the dashboard using these
buttons. (Fig. )
After inserting the Mounting Sleeve
into the
on top, bottom, and sides, then
bend them to secure the mounting
sleeve in the dash board.(Fig. 2)
Fig. 
9
Installation
dashboard, select tabs
. Dashboard
2. Nut (5mm)
. Spring washer
4. Screw (5 x 25mm)
5. Screw
6. Strap
7. Plain washer
Remove the
half sleeve