Mp3/Wma Operation (Cd) - Virtual Reality VRCD500-SDU Owner's Manual

MP3/WMA Operation
1. Insert/Eject CD
Insert a disc with MP3 and or WMA files
into the CD slot with label side up. The
disc will be automatically loaded into the
unit, even when it is off or in radio mode.
The word "MP3 DISC" will be displayed as
the CD is loaded. The first file in the root
folder will be played. As the file is playing
"ROOT" will be displayed first, then any
ID3 information available will be displayed
as the file is playing. Press the "EJECT"
Button to eject the disc from the slot. If the
disc is not removed from the slot within
5 seconds, it will automatically be loaded
into the slot again. When the disc is ejected
and removed, the unit will automatically
switch to radio mode.
2. Multi-Session CD Reading
This unit can read multi-session CDs. The
multi-session reading will be activated
automatically if the player detects a file that
is written in multi-session format. Press and
hold the Volume knob until "DSP OFF" is
shown on the LCD, then press the Volume
knob to cycle through the menu selections
until "MULT OFF" is shown. Use the VOL
+/ - Button to choose "MULT ON" or
"MULT OFF". The default is MULT OFF .
3. Selecting Tracks
On the Head Unit or Remote press the >>|
Button to advance CD to the next track.
Track numbers will be shown on the dis-
play. Press and hold >>| to fast forward.
On the Head Unit or Remote press the |<<
Button to go to a previous track. Track
numbers will be shown on the display.
Press and hold the |<< Button to fast
reverse. Disc will play normally when the
>>| or |<< Button is released.
4. Play/ Pause CD
On the Remote or Head Unit, press the
No.1/PAU button to pause the CD. Press
this button again to resume playback.
5. Scanning Tracks
On the Remote or Head Unit, press the
No.2/INT button to play the first 10 sec-
onds of each track. Press this button again
to resume playback.
6. Repeat
On the Remote or Head Unit, press the
No.3/RPT button to repeat the same track
continuously. "RPT ON" will appear on
the display. Press this button again to stop
repeating.
7. Random
On the Remote or Head Unit, press the
No.4/RDM button to play all the tracks in
random order. "RDM ON" will appear on
the display. Press this button again to stop
random play.
8. UP 10
Press the No.6/UP10 button to advance 10
tracks at a time.
9. DN 10
Press the No.5/DN10 button to go back 10
tracks at a time.
14