Virtual Reality VRCD500-SDU Owner's Manual page 13

Basic Operation
adjust the hour.
2. Rotate the volume knob to the left to
adjust the minute.
3. Press the "CLK" Button again or leave
the unit idle for new setting to effect.
Press the "CLK" Button anytime to view
the time clock display.
12. Preset Beep Sound
1. Press and hold the Volume knob on
the faceplate or the "SEL" button on the
remote, the LCD will show "DSP OFF".
2. Press the Volume knob on the faceplate
or the "SEL" button on the remote until the
display shows "BEEP ON", rotate the vol-
ume knob to toggle between "BEEP ON"
and "BEEP OFF", then leave the unit idle
for your desired setting to take effect.
13. Preset Equalizer Function
On the faceplate press and hold the Volume
knob or press the "SEL" button on the re-
mote for 2 seconds, the display will show
"DSP OFF". Rotate the Volume knob or
press the +/- button on the remote to choose
one of the "EQ" pre-sets; POP, ROCK,
CLASS, and FLAT. While listening to the
unit play the letters "EQ" will be displayed
on the right side of the display.
11