Usb Operation - Virtual Reality VRCD500-SDU Owner's Manual

USB Flash Memory Operation
To play MP3 / WMA files from a USB Flash
Memory Drive, remove the cover from the
USB port, insert the USB Flash Memory
Drive into the USB port. The unit will start
playing MP3/WMA files on the USB Flash
Memory Drive automatically. Or press the
MODE Button to select USB when the unit
has a USB Flash Memory Drive already in-
serted into the USB port
1. Play / Pause
When playing MP3/WMA in the USB
drive, press the No.1/PAU Button to pause
playback. Press the No.1/PAU Button again
to resume.
2. Selecting Files
If the MP3/WMA files are stored in folders
on the USB drive, the unit will start by play-
ing the first song in the first folder.
After playing all the files sequentially in the
first folder, the unit will play sequentially all
of the files in the next folder. The unit will
continue playing through all of the folders
on the USB drive in this manner.
If the USB drive has loose files and folders
containing files, it will play the loose files
sequentially, then it will play the files in the
folders sequentially.
3. Repeat
Press the No.3/RPT Button to repeat the
same files continuously. "RPT ON." will
appear on the display. Press this button
again to resume normal operation.
4. Random
Press the No.4/RDM Button to play all the
files in USB drive in random order. "RDM
ON" will appear on the display. Press this
button again to stop random play.
5. UP 10
Press the No.6/UP10 Button to advance 10
files at a time.
6. DN 10
Press the No.5/DN10 Button to go back 10
files at a time.
7. ID3 Tag
If an MP3/WMA file has ID3 tag informa-
tion, it will be displayed on the LCD. If
there is no ID3 tag information, nothing
will shown on LCD. On the left side of the
LCD there is an icon(fig.1) with the words
Folder, Music, & Artist. When Folder is lit
the folder name is displayed on the LCD.
When Music is lit the file name is displayed
on the LCD. When Artist is lit the artist's
name is displayed on the LCD.
16
Fig. 1