Table of Contents
Advertisement
10
2.1
Installation Safety Warnings
1.
Installation Instructions
Read all installation instructions before connecting the equipment to the power source.
2.
Over-temperature
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: °C (°F). Moreover, to guarantee proper air flow, allow
at least 8cm (3 inches) of clearance around the ventilation openings.
3.
Stacking the Chassis
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
4.
During Lightning - Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or discon-
nect cables.
5.
Copper InfiniBand Cable Connecting/Disconnecting
Copper InfiniBand cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for special
warnings and instructions.
6.
Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions must be taken to
ensure that the system remains stable. In general you should fill the rack with equipment
starting from the bottom to the top.
7.
Equipment Installation
This equipment should be installed, replaced, or serviced only by trained and qualified
personnel.
Rev 1.7
Mellanox Technologies
Advertisement
Table of Contents
