Mellanox Technologies InfiniScale III User Manual page 16

16
II. Using the ibnetdiscover tool:
Run:
[root@mymach]# ibnetdiscover | grep 00000006660abcd0 | grep -w Switch
Switch 24 "S-00000006660abcd0"
base port 0 lid 17 lmc 0
Note: The resulting LID is given as a decimal number.
4. Run mlxburn with the LID retrieved in step #3 above to perform the In-Band burning operation.
Burn the InfiniScale III switch:
[root@mymach]> mlxburn -dev /dev/mst/SW_MT47396_lid-0x0011 -fw ./IS3FW.BIN
-I- Reading PSID from board
-I- Using auto detected configuration file ./MT34000LE-A00.INI (PSID =
MT_0070000001)
-I- Generating image ...
33
Rev 1.01 Mellanox Technologies
- Checking primary image
Current FW Version:
New FW Version:
- Burning secondary image
- Verifying secondary image
- Burning primary image
- Verifying primary image
-I- Image burn completed successfully.
Rev 1.7
"MT47396 Infiniscale-III Mellanox Technologies"
MFT User's Manual
- OK
1.0.0
1.0.0
- OK
- OK
- OK
- OK
Mellanox Technologies