Table of Contents
Advertisement
On the Extension/Wireless unit:
AUTO ANSWER INT
REGISTRATION
2ND CALL ALERT
EXTENSION NAME
NOTE
Some options are system-wide and can only be programmed from the phone while in Main/Wired
mode.
7.4.1
Date/Time
DATE/TIME
The
option only exists in the Main/Wired unit, Extension/Wireless unit Date/Time
should update automatically after it is set in the Main/Wired unit.
From the
PHONE SETTING
Using VOL + and VOL - of the navigation button to scroll to DATE/TIME. Press
1.
2. The screen displays
3. Using the dial pad to enter the last two digits of the current year (range: 00 to 99).
4. Press
SAVE
softkey to save the year setting and proceed to the date setting.
5. The screen displays
6. Using the dial pad to enter two digits for the current month and day respectively
(format: mm/dd).
7. Press
SAVE
softkey to save the month/date setting and proceed to the time setting.
8. The screen displays
9. Using the dial pad to enter four digits for the current time and
between
P
(pm) and
10. When you are finished, press
NOTE
If you subscribe to Caller ID service, the current Date/Time is set automatically when you receive
your first CID record and will override manually set Date/Time. However, the Year must still be set
manually. The Year information is not in the CID record.
7.4.2
Auto Answer Intercom
When it is set to On, the unit will auto answer the intercom call when it receives an intercom call.
From the
PHONE SETTING
1.
Using VOL + and VOL - of the navigation button to scroll to
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
3. Press
SELECT
softkey to save your selection.
NOTE
The default setting is OFF.
7.4.3
Dial Mode
The Dial Mode of Line 1 and Line 2 can be set individually for each line.
PHONE SETTING
From the
1.
Using VOL + and VOL - of the navigation button to scroll to
2. Using VOL + and VOL - of the navigation button to select
3. Using PREV and NEXT of the navigation button to select
SELECT
4. Press
softkey to save your selection.
7.4.4
Area Code
The telephone uses the pre-programmed area code to determine the number format to display
when a valid Caller ID record is received. The pre-programmed area code is also used for the
Dialing Back feature.
PHONE SETTING
From the
1.
Using VOL + and VOL - of the navigation button to scroll to
16
menu:
YEAR
2011.
DATE
01/01.
TIME
12:00A.
A
(am).
SAVE
softkey.
menu:
menu:
menu:
SELECT
AM/PM
softkey to toggle
AUTO ANSWER
INT. Press
ON
or OFF.
DIAL
MODE. Press
SELECT
TONE
or PULSE.
L1
or L2.
AREA
CODE. Press
SELECT
softkey.
SELECT
softkey.
softkey.
Hide quick links:
Advertisement
Table of Contents
