From The Wan Port; End User Configuration; Figure 3: Screenshot Ofc; Ht-496 User Manual - Grandstream Networks HT-496 User Manual

F WAN :
ROM THE PORT
The WAN port HTML configuration option is disabled by default from factory. To access the HTML
configuration menu from the WAN port:
1. Enable the "WAN Port Web Access" option via IVR option 12.
2. Find the WAN IP address of the HT–496using voice prompt menu option 02.
3. Access the HT–496Web Configuration page by the following URI via WAN port:
http://HandyTone-IP-Address
NOTE: If using a web browser to enter the configuration page, strip the leading "0"s because the browser
will parse in octet. (i.e. if the IP address is: 192.168.001.014, please type in: 192.168.1.14).
E U C
ND SER ONFIGURATION
Once the HTTP request is entered and sent from a Web browser, the user will see a login screen. There
are two default passwords for the login page:
User Level:
End User Level
Administrator Level
Only an administrator can access the "ADVANCED SETTING" configuration page.
F 3: S
IGURE CREENSHOT OF
NOTE: If you cannot log into the configuration page by using default password, please check with the
VoIP service provider. The service provider may have provisioned and configured the device for you. The
Basic Configuration Page is the first web GUI the user will see.
Grandstream Networks, Inc.
VoIPon www.voipon.co.uk
(the HandyTone-IP-Address is the WAN IP address for the HT–496).
Password:
123
admin
C L - P
ONFIGURATION OG IN AGE
HT–496 User Manual
Firmware 1.0.3.64
sales@voipon.co.uk
Web pages allowed:
Only Status and Basic Settings
Browse all pages
Tel: +44 (0)1245 808195
Page 16 of 33
Last Updated: 1/2007
Fax: +44 (0)1245 600030